EAM20095
FRONT WHEEL
EAM30017
REMOVING THE FRONT WHEEL
ECA22340
NOTICE
• Keep any type of magnets (including mag-
netic pick-up tools, magnetic screwdrivers,
etc.) away from the speed sensor or speed
sensor rotor; otherwise, the sensor or rotor
may be damaged, resulting in improper op-
eration.
• Do not drop the speed sensor rotor or sub-
ject it to shocks.
• If any solvent gets on the speed sensor ro-
tor, wipe it off immediately.
1. Use a maintenance stand to raise the front
wheel off the ground.
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
2. Remove:
• Front wheel
EAM30021
INSTALLING THE FRONT WHEEL
1. Install:
• Front wheel
TIP
Install the brake disc "1" between the brake pads
"2" correctly.
2. Install:
• Front wheel sensor
• Front wheel sensor bracket
Front wheel sensor bolt
7 N·m (0.7 kgf·m, 5.2 lb·ft)
ECA21020
NOTICE
Make sure there are no foreign materials in
the front wheel sensor rotor and front wheel
2
1
sensor. Foreign materials cause damage to
the front wheel sensor rotor and front wheel
sensor.
TIP
When installing the front wheel sensor, check
the wheel sensor lead for twists.
3. Install:
• Front wheel axle "1"
TIP
Apply the lithium-soap-based grease to the front
wheel axle.
1
4. Tighten:
• Front wheel axle nut "1"
Front wheel axle nut
115 N·m (11.5 kgf·m, 85 lb·ft)
ECA24430
NOTICE
Before tightening the front wheel axle nut,
push down hard on the handlebar(s) several
times and check if the front fork rebounds
smoothly.
1 1
5. Tighten:
• Front wheel axle pinch bolt "1"
Front wheel axle pinch bolt
21 N·m (2.1 kgf·m, 15 lb·ft)
4-3
FRONT WHEEL