Yamaha WR250F 2023 Owner's Manual page 26

TIP
• Starting measurement consists of the following
two starts, either of which can be selected.
Manual start:
Starting measurement by the rider himself op-
erating the button.
Auto start:
Starting timer measurement automatically on
detection of the movement of the machine.
(When long pushing the A button and B button
simultaneously, the measurement will become
waiting status.)
• When the timer exceeds 19:59:59, the mea-
surement value will reset and stop.
• When the last traveled time remains in the tim-
er display and you want to perform a new mea-
surement, long push the A button for 1 second
or more to reset the timer.
Manual start
1. Push the A button and B button simultane-
ously to start the timer measurement.
2. Push the A button and B button simultane-
ously to stop the timer measurement.
TIP
Long pushing the A button for 1 second and
more while the timer measurement is being
stopped will reset the value.
3. Push the A button and B button simultane-
ously once again to restart the measurement.
MULTI-FUNCTION DISPLAY
Auto start
1. When pushing the A button and B button si-
multaneously for 1 second or more while the
timer measurement has been stopped, the
auto timer measurement will be set.
TIP
• When the measurement is ready to begin by
auto starting, the timer display will turn on
scrolling from left to right.
• When the speed exceeds 10 km/h (6 mph), the
measurement will start.
2. Push the A button and B button simultane-
ously to stop the timer measurement.
TIP
Long pushing the A button for 1 second and
more while the timer measurement is being
stopped will reset the value.
When reset is done, auto start will be canceled.
If you want to set auto start again, perform step
(1) of the settings.
1-16