Dell PowerEdge FC630 Owner's Manual page 62

2. Keep the #2 Phillips screwdriver ready.
3. Follow the procedure listed in
4. Remove the PCIe mezzanine card. See
Steps
1. Remove the two screws that secure the Network Daughter Card (NDC) to the system board.
2. Lift the card from the system board.
Figure 18. Removing and installing the NDC
1. slot on the NDC
3. NDC
5. connector on the system board
Next steps
1. Install the NDC. See Installing the Network Daughter
2. Install the PCIe mezzanine card. See
3. Follow the procedure listed in
62
Before working inside your
Removing a PCIe mezzanine
Card.
Installing a PCIe mezzanine
After working inside your
Get other manuals https://www.bkmanuals.com
system.
card.
2. screw (2)
4. standoff (2)
6. tab projections
card.
system.