Dell PowerEdge FC630 Owner's Manual page 52

Hide thumbs Also See for PowerEdge FC630:
Table of Contents

Advertisement

Steps
1.
Open the PCIe mezzanine card retention latch by pressing the release tab on the retention latch.
2.
Pull back and hold the retention bracket away from the PCIe mezzanine card.
3.
Lift the end of the retention latch until the two connectors on the PCIe mezzanine card disengage
from connectors on the system board.
CAUTION: To prevent damage to the PCIe mezzanine card, you must hold the card only by
its edges.
4.
Lift the PCIe mezzanine card up and away from the system.
5.
Close the retention latch.
Figure 12. Removing and installing a PCIe mezzanine card
1.
PCIe mezzanine card
3.
PCIe mezzanine card connector (2)
Next steps
1.
Install the PCIe mezzanine card. See
2.
Follow the procedure listed in
52
Installing a PCIe mezzanine
After working inside your
Get other manuals https://www.bkmanuals.com
2.
PCIe mezzanine card retention bracket
4.
PCIe mezzanine card retention latch
card.
system.

Advertisement

Table of Contents
loading

This manual is also suitable for:

E02b

Table of Contents