Familiarize yourself with the controls and
operating mechanisms before using the
Endurance X2.
(A) Pull-down pressing handle for raising
and lowering the upper platen. This
action forces the closing of the platens.
(B) Thickness control dial.
(C) On/Off button. The green light
above the button will illuminate when
powered on.
(D) Control Panel (See control board
operations)
(E) Handle for swing-out platen.
(F) Upper Platen
(G) Lower Platen
(H) Handle Adjustments (See tightening
the pull-down handle.)
Your dough press is equipped with a set of
rubber mounting pads.
If you would prefer a set of legs which would
raise your machine off the table 4 inches.
Please contact sales at
a set. Shipping charges may apply.
O P E R A T I O N T E M P E R A T U R E
& T I M E R C O N T R O L
i nfo@proluxe.com
for
FIG. A
4