Advertisement
7
Hang motor assembly onto the hook on
mounting plate for hands-free wiring and
safety cable installation.
(Use one of non-slotted holes on the
rim of the canopy).
10
Grounded
wires
After making the wire connections, the
wires should be spread apart with the
grounded conductor and the
equipment-grounding conductor on one
side of the outlet box and ungrounded
conductor on the other side of the outlet
box. The splices after being made should
be turned upward and pushed carefully up
into the outlet box.
© 2022 Monte Carlo Fan Collections
8
Hook
Lag screw
Safety cable
Washer
Lock washer
For Canadian installation and for USA fan
and light kit combinations over 35 lbs, in
both flush and downrod modes the safety
cable must be installed into the house
structure beams using 3" lag screws,
washers and lock washers provided.
Make sure that when the safety cable is
fully extended the lead wires are longer
than the cable and no stress is placed on
the lead wires.
Note
: If Installing The Secondary Support
Safety Cable in the U.S., Do Not Remove
Knockouts In The Outlet Box.
11
Ungrounded
wires
Lift fan to mounting bracket, aligning the
"L" shape holes on canopy with the
screws on the mounting bracket. Turn the
fan clockwise to lock in position. Install
the other 2 canopy mounting set screws
that are removed in the installation step 4
and tighten all screws securely.
Install decorative ring. Align the head of
set screws on the canopy with the groove
in the decorative ring and twist
counterclockwise till tight.
Safety cable installation
Canopy
Decorative
ring
Motor assembly
4
9
Black (Live)
Blue
Ground/Green
Ground/
Green
White
Black
Blue
Refer to page 6 for wiring,
installation and operation of
Wall controller. Do not operate
the fan or light until it is
installed completely.
12
Blade
Washer
Set screw
Insert blade into the slot on the flywheel.
Install blade by the screws and washers
provided, aligning each of the holes as
shown and tighten all screws securely.
Repeat this process for remaining blades.
White (Neutral)
To Wall
Outlet Box
Flywheel
9/2022
Advertisement
