Advertisement
13
Plate on motor
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
Place the lead wires from fan over the
central hole of light pan
Aligning the keyhole slots on the light pan
with the preassembled screws on the
plate and twist it clockwise till lock.
Reinstall the screw that is just removed.
Tighten all screws securely.
16
Light shade
Attach light shade by locating dimples in
light pan with grooves on the light shade
and twist clockwise until tight.
© 2022 Monte Carlo Fan Collections
14
Light pan
Loosen 2 and remove 1 preassembled
screw from light pan. Save screw for later
use.
17
Setting the reverse switch in the left hand
side will result in downward airflow and
setting the switch in the right hand side
will result in upward airflow.
Note: Reverse switch must be set either
completely Left or completely Right for
fan to function. If the reverse switch is set
in the middle position, fan will not
operate.
15
Connect white wire from fan to white wire
from LED light fixture and then connect
blue (or black) wire from fan to black (or
blue) wire from LED light fixture. Be sure
plugs connection clasped together firmly.
Attach LED light fixture onto the light pan,
aligning the keyhole slots on the LED light
fixture with the preassembled screws on
the light pan. Twist clockwise till lock.
Reinstall the screw removed in installation
step 14. Tighten all screws securely.
This light kit includes 2700 (Warm white),
3000 (Soft white) and 4000K (Daylight)
correlated color temperatures (CCT). Get
desired CCT by operating the converted
switch.
18
Reverse switch
5
Light fixture
Color temperature
converted switch
9/2022
Advertisement
