Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
3MAVR60XX Series Fan
CUL Model NO. : 3MAVR60XX
RETAILER NAME:
RETAILER ADDRESS:
4.81kg
10.6 lbs
Total fan weight
Advertisement
Related Manuals for Monte Carlo Fan Company 3MAVR60RZW
Summary of Contents for Monte Carlo Fan Company 3MAVR60RZW
- Page 1 Owner’s Guide and Installation Manual 3MAVR60XX Series Fan CUL Model NO. : 3MAVR60XX Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 4.81kg 10.6 lbs Total fan weight...
-
Page 2: Cautions And Warnings
Cautions and Warnings WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70), including fire-rated construction. -
Page 3: Safety Cable Installation
Ceiling joist Ceiling Outlet Box Ceiling Mounting Joists Bracket Screw/ Washers /Spring Washers 2˝ x 4˝ Outlet Before you begin installing the fan, Switch Before installing this fan makes sure the Partially loosen 2 of the set screws on mount - ing bracket corresponding to the slotted holes power off at Service panel and lock outlet box is properly installed to the... - Page 4 Downrod Canopy Screwdriver Canopy ring Cross pin Yoke cover Place downrod over canopy, canopy ring Thread lead wires and safety cable from For easy installation of cross ping on next and yoke cover. motor assembly through downrod. step. Carefully insert a phillips screwdriver through yoke and downrod (don’t damage the lead wires) as a guide and then push the cross pin and pull the screwdriver in the meantime...
- Page 5 To Motor U- Red White- AC IN N To Motor V- Purple Black- AC IN L To Motor W- Brown Receiver 120V Supply (Power Supply) Make wiring connections using wire connectors provided as indicated above. Red from fan to Red from remote marked Motor U. Purple from fan to Purple from remote marked Motor V.
-
Page 6: Remote Control Setting And Operation
REMOTE CONTROL SETTING and OPERATION Remove the battery cover from the remote control transmitter and Remote Transmitter install battery. Replace the cover. Note: Use 2 1.5V/AAA battery to replace battery. (Fig. 1) Note: If not using for long periods of time, remove battery to prevent damage to remote transmitter, and store the remote transmitter away from excess heat or humidity. - Page 7 LED Indicator The buttons on the remote control transmitter control the fan speed and light as follows. (Fig. 4) UP Speed Press the button to get desired fan speed, Low to High. Down Speed Press the button to get desired fan speed, High to Low. Press the OFF button to turn fan off.
-
Page 8: Troubleshooting
Trouble Shooting or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, installation, please call our Customer Service Center at the number printed on your parts list insert sheet. Warning means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. - Page 9 Feb.2016 Jul.2016 update step 11 Mar.2019 update step 5 Feb.2020 branding Apr.2021 add a wording about learn mold...