Table of Contents
Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
3MNLR56XXD Series Fan
ETL Model NO. : 3MNLR56
RETAILER NAME:
RETAILER ADDRESS:
7.74 kgs
17.03 lbs
Total fan weight with light kit
Advertisement
Table of Contents
Related Manuals for Monte Carlo Fan Company 3MNLR56
Summary of Contents for Monte Carlo Fan Company 3MNLR56
- Page 1 Owner’s Guide and Installation Manual 3MNLR56XXD Series Fan ETL Model NO. : 3MNLR56 Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 7.74 kgs...
-
Page 2: Cautions And Warnings
All set screws must be checked, and re-tightened where necessary, before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2013 Monte Carlo Fan Company 11/15/2013... -
Page 3: Safety Cable Installation
Note assembly on it for fan installation. : If Installing The Secondary Support Safety Cable in the U.S., Do Not Remove Knockouts In The Outlet Box. © 2013 Monte Carlo Fan Company 11/15/2013... - Page 4 Make sure that when the safety cable is fully extended the lead wires are longer than the cable and no stress is placed on the lead wires. © 2013 Monte Carlo Fan Company 11/15/2013...
- Page 5 Stuff plugs into the hole on side of blade. Set screws, bolts and plugs provided. Helpful hint: Make small adjustment by moving blade a little may help to align the holes on blade with holes on flywheel. © 2013 Monte Carlo Fan Company 11/15/2013...
-
Page 6: Remote Control Setting And Operation
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS. (1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Transmitter Trim plate Wall mount cradle Fig.2 © 2013 Monte Carlo Fan Company 11/15/2013... -
Page 7: Power On/Off
Press this button quickly to turn light on or off. To dim light, hold Light ON/OFF down the button, the light will cycle from bright to dim to bright & Dimmer until button is released. Light will maintain last setting if turned Remote Transmitter off. Fig.4 © 2013 Monte Carlo Fan Company 11/15/2013... - Page 8 4. When fan is turned on or operated forward/reverse function, it shutters & goes back & forth until it turns. It is a normal performance of this fan and it will take for few seconds to run this operation. © 2013 Monte Carlo Fan Company 11/15/2013...
-
Page 9: Troubleshooting
6.If this fan uses remote controller, make sure dip switches are setting properly and make sure battery is effective. CAUTION: Make sure main power is turned off before entering switch housing and/or canopy. © 2013 Monte Carlo Fan Company 11/15/2013... - Page 10 Nov.2013...