modway EEI-3196 Manual page 4

EEI –3196 Office Chair
STEP 5:
Attach Control Mechanism (3) to the Seat (4) by using 4 pieces of Bolts (B) and 4 pieces of Flat Washers (C)
as shown. Tighten Bolts (B) by using Allen Wrench (F) as shown.
Note: the four Bolts (B)
convenient assembly of
STEP 6:
Insert the Back Frame (5) to the hole of Control Mechanism (3) hole by using 3 pieces of Bolts (D) and 3 pieces
of Flat Washers (E) as shown.
Tighten Bolts (D) and Bolts (B) in the previous step by using Allen Wrench (F) as shown.
Customer Service 908-368-1025︱www.modwayfurniture.com
in this step cannot be locked tightly. Fix them with the
Back Frame (5).
B
3
7
4
F
D
E
7
4
5
F
C
FRONT
6
3
FRONT
6
Hardware & Tools required
Bolts (B) first, leaving room for
Hardware & Tools required
F
D
E
x 3
Hardware & Tools required
Page 4 of 6
x 1
x 3