Eiki EK-50LU Owner's Manual page 68

Description on using USB display function
■ When using Mac OS
Mac OS operating environment
OS
CPU
Amount of memory
Hard-disk free space 20 MB or more
Display
● There is no guarantee for all computers that meet the above conditions will operate properly.
Projecting the USB Display
1. Connect the USB-B terminal of the projector to a computer with a USB converting cable.
2. Press the INPUT button on the remote control or Control panel to switch the input source to
USB Display.
● The image on the computer screen is projected.
3. Double-click "Monitor.app" in the virtual disk that has been mounted.
4. Right-click the driver icon
● Pop-up menu is only displayed in English.
● The item which is displayed in gray is unavailable.
Active audio/
Disable audio
Play video/
Pause video
Start/Stop
Quit
Note:
- It will take a while when you want to project the computer screen.
- Connect a USB cable directly to the USB connector of a computer. It will not work when
connecting through a USB hub.
Termination of the USB display
When terminate the USB display, remove the USB cable directly.
68
Mac OS X 10.5, 10.6, 10.7, 10.8, 10.10, 10.11, 10.12, 10.13
Power PC G4 1GHz or faster
512 MB or more
Resolution 640 x 480 to 1600 x 1200
in the dock of computer and select one item in Pop-up menu.
Set whether to output the audio from the computer.
Switch between playing and pausing the image.
Set whether to display the image from the computer.
Terminate the USB Display.