Replacing the filter
Note:
• The filter is not washable or reusable�
• Do not smell the filter as it has collected pollutants from the air�
1
Replace the filter with Philips NanoProtect filter Series 3 (FY2180/10) ,
Please follow the step of Chapter "Installing the filter"�
2
Touch the
button
to switch on the
appliance�
EN
10
When the filter need to be replaced, the filter
replacement alert
3
Touch and hold the
filter status check/
reset button
for
3 seconds to reset
the filter replacement
time�
lights up red�
4
Wash your
hands
thoroughly after
replacing the
filter�