Cleaning The Surface Of The Filter; Replacing The Filter - Philips AC3055/50 User Manual

Cleaning.the.surface.of.the.filter.
Filter.alert.light.status
The filter cleaning alert
(fig ).
w
1 Switch off the air purifier and unplug from the power socket.
2
Pull the back cover and remove it from the appliance (fig
3
Pull the filter from the appliance (fig
4
Clean the surface of the filter with a vacuum cleaner (fig
5
Put the filter back into the appliance (fig
6
Reattach the back cover. (fig
7
Put the plug of the air purifier in the power socket.
8 Touch the button to switch on the appliance.
9
Touch and hold the filter status check/reset button
time�
10 Wash your hands thoroughly after cleaning the filter.
Replacing.the.filter
Understanding the healthy protection lock
This air purifier is equipped with a filter replacement indicator to make sure that the air purification
filter is in optimal condition when the air purifier is operating. When the filter need to be replaced, the
filter replacement alert
If the filter is not replaced in time, the air purifier will stop operating and automatically lock to protect
the air quality in the room. Replace the filter as soon as possible.
Replacing.the.filter
Note:
• The filter is not washable or reusable.
• Always turn off the air purifier and unplug from the electrical outlet before replacing the filter.
Filter.alert.light.status
The filter replacement alert
up (fig )
z
1
Switch off the air purifier and unplug from the power socket.
2
Pull the back cover and remove it from the appliance (fig
3
Pull the filter from the appliance (fig
4
Remove all packaging materials of the new filter (fig
EN
10
displays on the screen
).
x
).
f
)
g
lights up red.
Action
lights
Replace the NanoProtect filter Series 3 (FY3430/30)
).
x
Action
Clean the surface of the filter with a vacuum
cleaner�
).
c
).
y
for 3 seconds to reset the filter cleaning
).
c
).
e