Cleaning The Surface Of The Filter; Replacing.the.filter; Understanding The Healthy Air Protect Lock - Philips AC0850/11 User Manual

Cleaning.the.surface.of.the.filter
Wipe the surface of the filter with soft wet cloth or clean the surface of the filter
with a vacuum cleaner�
Note:
• if you use a high power/ industrial vacuum cleaner, it may damage the filter.
5 Replacing the filter

Understanding the healthy air protect lock

This appliance is equipped with the healthy air protect lock to make sure that the NanoProtect filter
is in optimal condition when the appliance is operating. When the filter is almost expired, the filter
replacement alert (
the filter in time, the filter replacement alert (
locked�

Replacing.the.filter

Note:
• The filter is not washable or reusable.
Always turn off the air purifier and unplug from the electrical outlet before replacing the filter.
•
OPEN CLOSE
1
1
Rotate the base anti-clockwise to remove it from the appliance�
2
Pull the filter out from the appliance. Discard the used filter.
3
Remove all packaging materials of the new filter.
4
Put the filter into the appliance.
5
Reattach the base and rotate it clockwise to fasten the base�
6
Put the plug of the air purifier in the power socket.
7
Press the power button
8
Press and hold
9
Wash your hands thoroughly after replacing the filter.
EN
8
) lights up red, which indicates that it needs to be replaced. If you do not replace
2
to switch on the appliance�
for 3 seconds to reset the filter lifetime counter.
) will flash. The appliance will stop operating and get
3
OPEN
4
CLOSE
5