Domo PIET HUYSENTRUYT DO9130KR Instruction Booklet page 44

DO9130KR
the desired speed by turning the speed control.
DISASSEMBLING
1. Remove the plug from the socket.
2. Remove the lid from the bowl.
3. Make a quarter turn on the release button, then push the head upwards until you
hear a click.
4. Remove the hook from the lock position and turn it a quarter in a clockwise
direction. Then slide the hook off the drive shaft and remove the hook. Remove
the hook gently as accidents with sharp edges may occur.
5. Turn the bowl in an anti-clockwise direction from the lock position and remove
the bowl.
6. Make a quarter turn backwards with the release button so that the head falls down.
Then push the head back into its original position until you hear a click.
CLEANING
1. Always remove the plug from the socket before cleaning the device.
2. Never immerse the motor unit in a bowl of water or under running water. Clean the
motor unit with a soft damp cloth.
3. Disassemble all accessories according to the user instructions in the section
"Disassembling".
4. For quick cleaning, rinse the accessories under running water.
5. For thorough cleaning, wash, rinse and dry the accessories.
OPTIONAL ACCESSORIES: VEGETABLE SLICER
DO9070KR-V
Turn the device off, and take the plug out of the socket before you add, remove or
clean any accessories.
1. Open the lid by pressing the release button and push it upwards.
2. The connecting point for accessories is now shown.
3. Place the vegetable cutter at an angle of 25° to the connection point and tighten it
by making a quarter turn clockwise. You hear a click when it is securely fastened.
Your vegetable cutter is now in a perfect vertical position.
1
2
44
3