Page 2
Or give us a call during our normal business hours of 8AM-5PM, Monday to Friday (PST.) We will be more than happy to assist you. Thank you for choosing AIDA Imaging as your camera solution! Page | 2...
Page 3
What you need: • UHD-100 Camera • Micro USB Cable • Windows PC (Mac not supported) • UHD_FW_UP Software • Latest Firmware (bin file) *The UHD_FW_UP software and latest firmware come in the same file as this guide. For the most recent firmware, please visit our download page and check the latest firmware tab.
Page 4
Step 1: Software installation 1. Run the file UHD_FW_UP_setup_v0.2 as seen below. 2. Follow the installation directions. 3. Once installed, the UHD_FW_UP shortcut icon will be created on the desktop screen. 4. Open the shortcut, and you will see an interface similar to the picture below.
Page 5
Step 2: Firmware Update 1. Power on the camera with the original or recommended power supply. Ensure that the power does NOT get interrupted during the updating process. 2. Connect the UHD-X3L to your computer via the micro USB cable 3.
Page 6
5. After selecting the correct port, press the open button. 6. Next, click “파일열기.” (Open File.) Then select the UHD 100 bin file found in the folder. Page | 6...
Page 7
7. Lastly, click “시작” (start.) This will begin the updating phase. *Ensure that no interruption to the power or cable happens. 8. You know the update is done when you see this screen. You may now unplug the micro USB cable. Page | 7...
Page 8
this point, you may close the program. If you want to check if the FW update worked, go to the OSD menu on the camera and check system info. The FW number should match the most recent bin file date you updated. Again, if you have any questions about this process, please message our support staff at:...
Need help?
Do you have a question about the UHD-100 and is the answer not in the manual?
Questions and answers