Table of Contents
Advertisement
1
Y
X
Choose a location, ensure the antenna is positioned
on a flat surface and is clear from obstructions.
Use the included template and drill 5 x 2mm holes.
Use hole position (Y) as a pilot hole to drill a larger
25mm hole. Clean up hole, ensuring the location of
the Mounting Foot is clean and clear from debris
and dirt.
3
Position the Mounting Foot and press down firmly.
5
If your roof thickness is between 19-40mm, you
can screw the Foot Clamp into the Mounting Foot
underside to cover the hole inside the vehicle.
Note: The Clamping Tool can
be cut down to suit your
vehicle roof thickness.
Turn anti-clockwise until
tight and secure Foot Clamp
with the Foot Clamp Screw.
Installation of the Mounting Foot is now complete.
! Allow the Flexible Adhesive to cure as per the manufacturers guidelines before travel.
X = 2mm
Y = 25mm
X
X
Front of
X
vehicle
19-40mm
2
Apply sealant generously to the wet seal channel,
ensuring the bead is consistent in size with no gaps.
4
OPTIONAL - For optimum secure mounting, use the
4 supplied Roof Fixing Screws, to secure the
Mounting Foot to the vehicle roof.
6
Installing the Antenna Head Unit
Place the Antenna Head Unit onto the Mounting Foot.
Tighten the 4 Foot Mounting Bolts by hand with an
Allen Key.
We recommend the use of a Torque Wrench set to
3.5Nm.
7
Advertisement
Table of Contents
