How To Start A Wps Session Via The Admin Tool - Technicolor MediaAccess TC8715 Setup And User Manual

Table of Contents

4.2 How to start a WPS session via the Admin Tool

Adding a wireless client using WPS PBC

1 Make sure that the WPS button of your wireless client is accessible. This button can be a hardware button or a software

button.

2 Browse to the Admin Tool (http://192.168.0.1).

For more information, see

3 On the Gateway menu, click Connection and then click WiFi.

4 The WiFi page appears, click Add Wifi Protected Setup (WPS) Client.

5 The Add WiFi Client page appears.

6 Click Pair.

7 Within two minutes, press the pair button of your wireless client.

Adding a wireless client using WPS PIN entry on the wireless client

1 Browse to the Admin Tool (http://192.168.0.1).

For more information, see

2 On the Gateway menu, click Connection and then click WiFi.

3 The WiFi page appears, click Add Wifi Protected Setup (WPS) Client.

4 The Add WiFi Client page appears.

5 Write down the number displayed in AP PIN.

6 In the WPS Pin Method list, click Enabled.

7 Open the WPS PIN page of your wireless client and enter the PIN that you wrote down.

"Accessing the Admin Tool" on page

25.

DMS3-CTC-25-114 v1.0

Table of Contents