Table of Contents
Advertisement
1.2.3 Back panel
Overview
Reset button (item A)
The Reset button allows you to:
Restart the MediaAccess Gateway.
Restore the factory defaults of the MediaAccess Gateway.
For more information, see
USB ports (item B)
The USB (
) ports allow you to:
Connect a USB mass storage device to share your content (for example, music, movies,...) on your local network via the
Network File server or the UPnP AV media server. For more information, see
Power or charge a USB device.
Ethernet switch (item C)
The Ethernet switch
information, see
"2.3 Connect your wired devices" on page
All Ethernet ports on the MediaAccess Gateway are Gigabit Ethernet ports and have a maximum speed of 1 Gbps (Gigabit per
second).
Each Ethernet port has two LEDs:.
LED
Top LED
(Green)
DMS3-CTC-25-114 v1.0
"8.3 MediaAccess Gateway reset and restore options" on page
(
)
allows you to connect an Ethernet device (for example, a computer) to your local network. For more
LED status
Description
Solid on
Connected to a Gigabit Ethernet device.
Blinking
Connected to a Gigabit Ethernet device and sending/receiving data.
Off
Not connected to a Gigabit Ethernet device.
A
B
C
D
E
70.
"5 Sharing content" on page
16.
1 GETTING STARTED
37.
9
Advertisement
Table of Contents
