Elation KLF060 User Manual page 11

I N S TA L L AT I O N I N S T R U C T I O N S
RIGGING
Overhead rigging requires extensive experience, including calculating working load limits,
knowledge of installation material being used, and periodic safety inspection of all
installation material and the fixture, among other things. If you lack these qualifications, do
not attempt the installation yourself. Improper installation can result in bodily injury.
CLAMP INSTALLATION
The included yoke bracket features a built-in attachment point for a mounting clamp. The
fixture itself also features a safety cable loop, located near the top of the rear panel, as
shown in the illustration below. Please note that the designated safety cable loop is the
only safe location to attach a safety cable! Never attach a safety cable to the mounting
clamp bracket!
MOUNTING CLAMP
ATTACHMENT POINT
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A
SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL NOT FALL IF
THE CLAMP FAILS.
11
SAFETY
CABLE
LOOP