Before You Start; Tools Needed - Sim-Lab X1-PRO Instruction Manual

BEFORE YOU START:

Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions
on assembly. This requires only a set of simple tools and some of your time. Please check the bill of
materials before starting (page 12) and make sure all the parts are delivered.
In this manual, we combined the single and triple integrated monitor mount. This is because we packaged
the triple version as an upgrade to the single one.
This product combines some products we normally offer separately. We encourage you to read the
product manuals for included products if this one doesn't answer all of your questions. Please refer to the
following if needed:
www.sim-lab.eu/xero-play-pivots-manual
www.sim-lab.eu/vario-vesa-manual
Inserting Slot-Nuts:
You got excited, finished the build, put the caps on, but forgot to install
one element. Do not worry. It happens to everyone. In this diagram, you
can see how to insert a Slot-Nut directly into the slot from the side.
You can also use one of your smaller Hex wrenches to help wiggle
the Slot-Nut in place.

Tools needed:

6MM 13MM
2
2 13 |