IFM Electronic efector500 PI2658 Operating Instructions Manual page 23

ifm process adapter
Mount adapter (C) to the sensor
first, then sensor + adapter to
the process connection by means
of a nut, a clamping flange or
similar (B).
NOTE: A guarantee for a long-
term stable sealing of the metal
seal is only valid for once-only
mounting.
B
C
Mounting of the adapter
Step 1
Screw the sensor into the
adapter.
Step 2
Clamp sensor and adapter into a
clamping device (D). The sealing
chamfers (E) must not be dam-
aged. Tighten the sensor with a
spanner.
41
Tightening torque: 20 Nm.
D
E
24