www.ti.com
4.6 Setup
The test setup, which includes several connections to Picotest Bode100 test instruments, is shown in
with measurement results shown in
circuit is optional. Omitting it will result in slightly increased phase margin. However, the benefit of including it is
that the gain curve is set in a downward trajectory as frequency increases, making a monotonic gain curve more
likely to be achieved.
SLVUC73A – JANUARY 2022 – REVISED AUGUST 2023
Submit Document Feedback
Figure
4-8. The CHF, high frequency pole, component of the compensation
Figure 4-7. Frequency Response Test Setup
Figure 4-8. Frequency Response
Copyright © 2023 Texas Instruments Incorporated
TPS7H4003EVM Testing
Figure 4-7
TPS7H4003EVM Evaluation Module (EVM)
9