Table of Contents
Advertisement
• Port
• VLAN
Buttons
: Click to configure ERPS.
: Click to save changes.
: Click to show the ring topology.
4.6.2 ERPS
This page allows the user to inspect and configure the current ERPS Instance; screen in
Object
• Enable
• ERPS ID
• Version
• Ring Type
• Port 0
• Port 1
• Node ID
Configures the port number for the MEP.
Set the ERPS VLAN.
Figure 4-6-2: Ethernet Ring Protocol Switch page screenshot
Description
Enables ERPS on the switch. ERPS must be enabled globally on the switch
before it can enable on an ERPS ring.
Major ring group ID for the interconnected sub-ring. It is used to send topology
change updates on major ring. If ring is major, this value is same as the
protection group ID of this ring.
ERPS Protocol Version - v1 or v2
Type of Protecting ring.
This will create a Port 0 of the switch in the ring.
This will create "Port 1" of the switch in the Ring. As interconnected sub-ring will
have only one ring port, "Port 1" is configured as "0" for interconnected sub-ring.
"0" in this field indicates that no "Port 1" is associated with this instance
A MAC address unique to the ring node. The MAC address must be specified in
the format xx:xx:xx:xx:xx:xx
User's Manual of GS-4210 Series
334
Figure 4-6-2
and
Figure 4-6-3
appears.
Advertisement
Table of Contents
