6.25 Ethernet Ring Protection Switching Command
ERPS Command
Description:
Invoking an administrative command for a given protection group
[fs|ms|clear] : setting or clearing an administrative command for a given group
<port>
: forced a block on the ring port where this command is issued
<group_id>
: protection group id
Syntax:
Erps command [fs|ms|clear] <port> <group-id>
Parameters:
fs|ms|clear: administrative commands
<port>
: Port number
<group-id> : protection group id 1 - 64
ERPS Version
Description:
Specifying protocol version for a given protection group
[v1|v2]
: specifying protocol version for a given protection group
<group_id> : protection group id
Syntax:
Erps version [v1|v2] <group-id>
Parameters:
v1|v2
: ERPS protocol version to be supported
<group-id>: protection group id 1 - 64
ERPS Add
Description:
create a new ethernet ring protection group
<group-id> : protection group id
570
User's Manual of MGSD-10080F