Multi-Function Meter Unit - Yamaha Star 2011 Owner's Manual

U1BH12E0.book Page 3 Wednesday, July 6, 2011 4:06 PM
then go off for 3.0 seconds. If this oc-
curs, have a Yamaha dealer check the
vehicle.
Engine trouble warning light "
This warning light comes on or flashes
if a problem is detected in the electrical
circuit monitoring the engine. If this oc-
curs, have a Yamaha dealer check the
self-diagnosis system. (See page 4-5
for an explanation of the self-diagnosis
device.)
The electrical circuit of the warning light
can be checked by turning the key to
"ON". The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
INSTRUMENT AND CONTROL FUNCTIONS

Multi-function meter unit

EAU11534
1
"
1. Speedometer
2. Odometer/tripmeter/fuel reserve tripme-
ter/clock
3. Fuel gauge
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
The multi-function meter
equipped with the following:
G a speedometer
G a fuel gauge
G an odometer
4-3
G two tripmeters (which show the
EAU45683
distance traveled since they were
last set to zero)
G a fuel reserve tripmeter (which
shows the distance traveled on the
2
fuel reserve)
G
a clock
G
a self-diagnosis device
G
a brightness control mode
3
TIP
Be sure to turn the key to "ON" before
using the "SELECT" switch "
and "RESET" switch, except for setting
the brightness control mode.
EWA12422
1
2
unit is
1. "SELECT" switch " /
2. "RESET" switch
4
/ "
"