U1BH12E0.book Page 6 Wednesday, July 6, 2011 4:06 PM
INSTRUMENT AND CONTROL FUNCTIONS
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
Brightness control mode
4
1
1. Speedometer panel
2. Brightness level display
This function allows you to adjust the
brightness of the speedometer panel to
suit the outside lighting conditions.
To set the brightness
1. Turn the key to "OFF".
2. Push and hold the "
" side of the
"SELECT" switch.
3. Turn the key to "ON", and then re-
ECA11590
lease the "SELECT" switch after
five seconds or more.
4. Push the "
" or "
"SELECT" switch to select the de-
sired brightness level.
5. Push the "RESET" switch to con-
firm the selected brightness level.
The display will return to the odom-
eter or tripmeter mode.
2
4-6
Handlebar switches
Left
" side of the
2
3
1. Dimmer switch "
2. Turn signal switch "
3. Horn switch "
"
EAU12349
1
/
"
/
"