Viewing A Still Picture - Memory Photo Playback - Sony Handycam DCR-TRV510 Operating Instructions Manual

Viewing a still picture – Memory photo
playback
You can play back still images recorded in the built-in flash memory. You can also play
back 6 images at a time by selecting the index screen.
(1) Set the POWER switch to CAMERA.
(2) Turn STANDBY to MEMORY.
(3) While pressing OPEN, open the LCD panel.
(4) Press MEMORY PLAY. The last recorded image is displayed.
(5) Press MEMORY +/– to select the desired still image. To see the previous
image, press MEMORY –. To see the next image, press MEMORY +.
1
POWER
CAMERA
OFF
VTR
3
4
PLAY
To stop memory photo playback
Press MEMORY PLAY again.
To play back recorded images on a TV screen
•Connect your camcorder to the TV with the supplied A/V connecting cable before
operation.
•When operating memory photo playback on a TV or the LCD screen, the image
quality may appear to have deteriorated. This is not a malfunction. The image data is
as good as ever.
•Turn the audio volume of the TV down before operation, or noise (howling) may be
output from the TV speakers.
2
START/STOP
5
65