Introduction And Safety Information; Preface; Proper Usage; Intended Document User - XCHARGE C6EU Series Installation And Operation Manual

1. Introduction and Safety Information

1.1 Preface

This manual describes the features and functions as well as installation, operation and
maintenance of the XCHARGE C6EU hyper charger.
Due to the high technical modularity and the different customer requirements there are
various variants, which differ in the maximum output power, the installed charging cables
and connectors as well as display. The components shown in this guide are all example
graphics. The illustrations and explanations refer to a typical version of the device. The
design of your device may differ from description in manual. Please read this document
carefully and adapt to the realistic.

1.2 Proper Usage

This product is a high-power EV supply equipment (EVSE) for recharging electric vehicles
(EVs) using the fixed cable and CCS Combo 2 (CCS2) and/or CHAdeMO connectors.
When any loss or damage occurs due to improper use or unauthorized modification of the
product, XCHARGE SHALL NOT be liable for the product, the purchaser or third parties. The
same is also valid if the maintenance provided by XCHARGE is not strictly complied.
The installation requires a planning with care and can only be carried out by qualified
personnel (electricians).

1.3 Intended document user

This document is intended for:
• Customers who purchased a C6EU, or are in the process of ordering and want to
know in more detail about installation and maintenance;
• Contractors who are responsible for site preparation and/or installation of a C6EU
Contractors who, as a qualified electrician, perform the installation,
commissioning, maintenance or repair of the XCHARGE C6EU charging station.
Requirements for the electrician:
Knowledge of the relevant safety and accident prevention regulations;
•
Knowledge of electrotechnical regulations;
•
knowledge of national regulations;
•
Ability to recognize risks and avoid dangers.
•
4 Copyright | C6EU SERIES Installation and Operation Manual, Version 1.6