Unpacking; Positioning And Wiring - XCHARGE C6EU Series Installation And Operation Manual

4.5.2 Unpacking

Remove the package to confirm that charging station is compact.
• Release the clips on the wooden box;
• Remove the outer wooden box with a crowbar;
• Remove foam plastic protection;
• Remove the inner shrink wrap.
WARNING
Risk of suffocation!
Children are not allowed to play with plastic wrap and shrink wrap.

4.6 Positioning and wiring

CAUTION
Material damage due to improper handling
Collisions and bumps can damage the charging station
-
Move the charging station with the utmost caution
-
Please use a soft pad to set down the charging station
-
Insert the forklift from the bottom facing the
station and move the charging station to the desired installation location. As shown in
Figure 4.6.1 the width of fork is up to 420mm and the length of fork is min. 600mm. Please
move the charging station with the utmost caution!
Copyright | C6EU SERIES Installation and Operation Manual, Version 1.6
connector
Figure 4.6.1 Forklift parameter
side (CCS or CHAdeMO) of charging
23