Intended Use; Functional Description And Specifications; Technical Data - BorMann BAG1500 Manual

EN
Always use auxiliary handle, if provided, for maximum control over kickback or torque reaction during start-up.
The operator can control torque reactions or kickback forces, if proper precautions are taken.
Never place your hand near the rotating accessory. The accessory may kickback over your hand.
Do not position your body in the area where the power tool will move if kickback occurs. Kickback will propel the tool in the
direction opposite to the wheel's movement at the point of snagging.
Use special care when working corners, sharp edges, etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or
bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback.
Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create frequent kickback and loss of control
over the power tool.

Intended Use

Angle grinders are intended for cutting, roughing and brushing metal and stone materials without using water.
They can also be used as sanding tools when combined with the appropriate approved sanding disks and pads.
Concrete grinders are suitable for grinding cement and other similar surfaces.

Functional Description and Specifications

The following numbering refers to the illustration of the
machine indicated on page 2.
1 On/Off Switch
1a On/Off Switch safety button*
2 Protective Guard
3 Inner Flange
4 Outer Flange
5 Spindle Lock Button
6 Speed Adjustment Selector*
7 Main Handle Adjustment Button*
8 Carbon Brush socket Cover
9 Secondary handle*
10 Spanner*
11 Ventilation Slots

Technical Data

Model: BAG1300
Rated Voltage:
230V/120V
Rated Frequency 50/60Hz
Input Power:
1010w
No load Speed:
3000-10000Rpm
Ø 125mm
5
BAG1500 BAG1700
230V/120V 230V/120V
50/60Hz 50/60Hz
1400w 1700w
10000Rpm 0-10500Rpm
125mm 125mm
WWW.NIKOLAOUTOOLS.GR
* The accessories illustrated or described are not
included as standard delivery.
* The manufacturer reserves the right to make minor changes to product
design and technical specifications without prior notice unless these changes
significantly affect the performance and safety of the products. The parts
described / illustrated in the pages of the manual that you hold in your hands
may also concern other models of the manufacturer's product line with
similar features and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity,
all repair, inspection, repair or replacement work, including maintenance
and special adjustments, must only be carried out by technicians of the
authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the
product with non-provided equipment may cause malfunctions or even
serious injury or death. The manufacturer and the importer shall not be
liable for injuries and damages resulting from the use of non-conforming
equipment.
BAG2400 BAG7200
230V/120V 230V/120V
50/60Hz 50/60Hz
2400w 720w
6500Rpm 11000Rpm
230mm 125mm
BAG7800
230V
50Hz
840w
11000Rpm
125mm