Advertisement
Available languages
Available languages
EN
easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working
conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a
hazardous situation.
Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
Safety Warnings for Sanders
a) Use the machine only for dry sanding. Penetration of water into the machine increases the risk of an electric shock.
b) Pay attention that no persons are put at risk through sparking. Remove any combustible materials in the vicinity. Sparking
occurs when sanding metal materials.
c) Caution, fire hazard! Avoid overheating the object being sanded as well as the sander. Always empty the dust collector
before taking breaks. In unfavourable conditions, e. g., when sparks emit from sanding metals, sanding debris in the dust bag,
micro filter or paper sack (or in the filter sack or filter of the vacuum cleaner) can self-ignite. Particularly when mixed with
remainders of varnish, polyurethane or other chemical materials and when the sanding debris is hot after long periods of
working.
d) When working with the machine, always hold it firmly with both hands and provide for a secure stance. The power tool is
guided more secure with both hands.
e) Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.
Product Description and Specifications
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics page for the machine and leave it open.
Intended Use
The machine is intended for dry sanding of wood, plastic, metal, filler as well as coated surfaces. Machines with electronic
control are also suitable for polishing.
The power tool is not suitable for stationary usage.
Product Features
The numbering of the product features refers to the illustration of the machine on the graphics page.
1. Auxiliary handle
3. Thumb-wheel for orbit frequency pre-selection
5. Lock-on button for On/Off switch
2. Screw for auxiliary handle
4. On/Off switch
6. Dust box
7. Sanding plate
8. Handle
Assembly
Before any work on the machine itself, pull the mains plug.
Replacing the Sanding Sheet
To remove the sanding sheet, lift it from the side and pull it off of the sanding plate.
When attaching a new sanding sheet, remove any dust or debris from the sanding plate , e. g. , with a brush.
The surface of the sanding plate is fitted with Velcro backing for quick and easy fastening of sanding sheets with Velcro
adhesion.
Press the sanding sheet firmly against the bottom side of the sanding plate.
3
WWW.BORMANNTOOLS.COM
Advertisement
