R&S ENY-FTS
2.2 Asymmetrical impedance and phase
The test set-up is calibrated with the measurement cable connected using the
Impedance Measurement Adapter „Jig IMA U0" and the Termination Adapters „Jig
TRA U0-150" as shown in Figures 2, 3 and 4 ("Open", "Short" and "50 C"). See FULL-
ONE-PORT calibration (OSM) of the network analyzer.
Fig. 2
Fig. 3
Fig. 4
Operating Manual 1309.8949.14 - 02
Calibration set-up "Open" for Asymmetrical Impedance and Phase
Calibration set-up "Short" for Asymmetrical Impedance and Phase
Calibration set-up "50 ," for Asymmetrical Impedance and Phase
Operation
10