Download Print this page

Maintenance And Care; Troubleshooting - Kärcher WD 5.200 MP Quick Start Manual

Advertisement

 Illustration
Connect the mains plug of the electric
power tool to the vacuum cleaner.
 Illustration
Switch the appliance on (move the rota-
ry switch to the left to position
MAX) and start working.
Note: The suction turbine starts with a
delay of 0.5 seconds after the electric
tool has been switched on. After the
electric tool has been switched off, the
suction turbine will continue to run for
approx. 5 seconds to suck in the re-
maining dirt from the suction hose.
Blowing function
Cleaning hard to reach locations or, where
vacuuming is not possible, like leaves from
a gravel bed.
 Illustration
Connect the suction hose to the blower
connection, this will activate the blower
function.
Interrupting operation
 Turn off the appliance.
 Illustration
Hook the floor nozzle into the parking
position.
Finish operation
 Turn off the appliance and disconnect
the mains plug.
Empty the container
 Illustration
Remove the appliance head and empty
the reservoir filled with wet or dry dirt.
Storing the appliance
 Illustration
Stow away the mains cable and acces-
sory at the machine. Store the appli-
ance in a dry room.
8
English

Maintenance and care

Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Repair works may only be performed by the
authorized customer service.
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
 Clean the appliance and accessory
parts made of plastic with a commercial
plastic cleaner.
 If required, rinse the container and ac-
cessories with water properly and dry
them before reuse.
 Illustration
Only clean the cartridge filter under run-
ning water; do not wipe or brush. Let it
dry completely prior to installation.

Troubleshooting

Decreasing cleaning power
If the cleaning power of the appliance dete-
riorates please check the following:
 Accessories, suction hose or suction
tubes are clogged, please remove the
obstruction using a stick.
 Cartridge filter is dirty:
Knock the dirt off the cartridge filter,
clean it under running water if neces-
sary.
(see description / illustration
 Replace damaged cartridge filter.
)

Advertisement

loading