Advertisement
Accessory storage container
This accessory compartment allows the
storage of the suction pipes or other ac-
cessories.
(see description / illustration
Steering roller
Cartridge filter
(already installed in the appliance)
The cartridge filter must always be in-
stalled - with wet and dry vacuuming.
Note: Let the wet cartridge filter dry pri-
or to using it for dry vacuuming.
(see description / illustration
Suction hose with handle
Slide the suction hose into the connec-
tion, it will lock into place.
(see description / illustration
Note: In order to disconnect it, push
down with your thumb and pull the suc-
tion hose out.
Suction tubes 2 x 0.5 m
Connect both suction pipes and con-
nect them to the suction hose.
(see description / illustration
Floor nozzle
(with inserts)
Use the appropriate insert for vacuum-
ing on hard surfaces and carpets.
Hard surfaces, wet vacuuming: Use
the insert with 2 rubber lips.
Hard surfaces, dry vacuuming: Use
the insert with 2 bristles.
Carpets, wet and dry vacuuming:
Work without an insert.
Crevice nozzle
For edges, joints, heaters and hard to
reach locations.
Adapter
To connect the suction hose with an
electric tool.
(see description / illustration
Always work with an inserted car-
tridge filter - during wet as well as
dry vacuum cleaning!
)
Illustration
Mount loose parts delivered with appli-
ance prior to start-up.
Illustration
Insert and lock the appliance head.
)
Illustration
Connect accessories.
Illustration
Plug in the main plug.
Illustration
)
Turn on the machine.
Work only with a dry cartridge filter!
Caution: Always use a pre-separator
while vacuuming ashes and soot (order
no. 2.863-139).
)
Attach the accessories to vacuum mois-
ture or wetness to the suction pipes or
directly to the handle.
Caution
Immediately switch the appliance off or pull the
power plug if foam forms or liquids escape!
Note: If the container is full a float closes the
suction opening and the appliance works at a
higher speed. Switch off the appliance imme-
diately and empty the container.
Working with electrical power tools
Adapt the adapter to the connection di-
ameter of the electric tool using a knife
if necessary.
Illustration
Plug the enclosed adapter onto the
)
handle of the suction hose and connect
the electric tool with the connection.
Operation
Before Startup
Start up
Dry vacuum cleaning
Wet vacuum cleaning
7
English
Advertisement
