Table of Contents
Advertisement
Manual
Electrical mounting
MJK 713 must not be connected to the power supply
before the ultrasonic sensor / pressure transmitter is
mounted and connected correctly.
MJK 713 is supplied from the mains on terminal
"0" and "P".
Current regulations for conductor and fuse dimensions
should always be observed.
MJK 713 System Package 1
MJK 713 2500 with ultrasonic sensor
(Can be extended to max.150 ft. using
Ultrasonic Sensor
MJK 713 System Package 3
MJK 713 3000 with hydrostatic level transmitter
Pressure Transmitter
US 3.10 713 FLOW CONVERTER 1905 - SW 833062
1.888.610.7664
Standard cable length 40 ft.
MJK no. 690010 cable.
No. 1 = brown
No. 2 = red
No. 3 = orange
No. 4 = yellow
No. 5 = black
No. 1 = red
No. 2 = brown
No. 3 = black
www.calcert.com
15
10
20
5
25
0
30
Remove the lid to gain access to the terminals.
MJK 713 2500 Flowmeter
Power
supply
Power
supply
Note:
1: Conduit hubs are to beconnected to the
conduit prior to the connection to the enclosure.
2: Terminal tightening torque = 0.5 Nm.
14
sales@calcert.com
Advertisement
Table of Contents
