Table of Contents
Advertisement
4. Connect the audio cable.
You may connect headphones to the headphone jack found
on the back side of the monitor.
Pass the cable through the cable management hole on the
stand arm.
5. Connect USB devices.
To Connect the USB Type-B Cable
Connect the USB cable between the PC and the monitor
(via the upstream USB port at the back). This upstream
USB port transmits data between the PC and the USB
devices connected to the monitor
Connect USB devices via other USB ports (downstream)
on the monitor. These downstream USB ports transmit
data between connected USB devices and the upstream
port.
6. Install the I/O cover.
Align the I/O cover with the holes on the back of the
monitor, and press the sides and the bottom of the cover
against the holes to lock it into place. Push from the
bottom of the cover and check if the it has been installed
properly.
20
1
2
Advertisement
Table of Contents
