Table of Contents
Advertisement
Configuring NVMe RAID Manually
RAID for NVMe SSDs is enabled by default when Intel VROC Raid Key is populated. It may
be managed manually through the UEFI BIOS.
1. Reboot the workstation and press the [DEL] key to access the BIOS options.
2. Switch to Advanced > Chipset Configuration > North Bridge > IIO Configuration >
Intel® VMD Technology.
You can select a mode. The default is Auto. The VMD switch enables VMD mode for all
NVMe ports despite the presence of the VROC key. The Manual switch allows the user to
choose devices on which to enable VMD.
The onboard M.2 NVMe from PCH is located in the CPU1 section.
The screenshot below shows example choices in Manual mode.
Figure 6-4. BIOS, Selecting VMD Mode
96
Chapter 6: Optional Components
Advertisement
Table of Contents
Troubleshooting
