Configuring Nvme Raid Manually - Supermicro SuperServer 220U-TNR User Manual

Configuring NVMe RAID Manually

RAID for NVMe SSDs is enabled by default when Intel VROC Raid Key is populated. It may
be managed manually through the UEFI BIOS.
1. Reboot the server and press [DEL] key to access the BIOS options.
2. Switch to Advanced > Chipset Configuration > North Bridge > IIO Configuration >
Intel® VMD Technology.
You can select a mode. The default is Auto. The VMD switch enables VMD mode for all
NVMe ports despite the presence of the VROC key. The Manual switch allows the user to
choose devices on which to enable VMD.
The onboard M.2 NVMe from PCH is located in the CPU1 section.
The screenshot below show example choices in Manual mode.
Figure 6-7. BIOS, Selecting VMD Mode
85
Chapter 6: Optional Components