Options - Smeg STO905U Instruction Manual

Smeg sto905u: user guide
Table of Contents

Advertisement

USER INSTRUCTIONS
Close the door again.
After about 1 minute, the dishwasher terminates the cycle and the indicator
lights of the fourth and fi fth programs (ref. pr. 4, pr. 5 fi g. 2-03) start fl ash-
ing.
2.2.7

Options

MULTI-ZONE SELECTION
(available for all programs except soak)
This function should be used when some dishes are dirtier than others; load the
dirtier dishes on the right- or left-hand side of the rack where washing power
will then be concentrated.
Before selecting the multi-zone wash option, open the dishwasher door and
choose the required washing program (see para 2.2 "Setting the washing pro-
gram and switching on and off"). Press the button (ref. 9 fi g. 2-02) repeatedly to
select the zone where to concentrate washing power, as follows:
1.
right-hand zone 65% - left-hand zone 35% (right-hand indicator light on);
2.
right-hand zone 35% - left-hand zone 65% (left-hand indicator light on);
3.
both zones 50% (indicator lights off).
press the button once to select washing in the upper rack. This is con-
fi rmed by the relative indicator light (ref. 10a fi g. 2-02);
press the button twice to select washing in the lower rack. This is con-
fi rmed by the relative indicator light (ref. 10b fi g. 2-02);
press the button three times to return to the standard full load condition
(washing in both racks, both indicator lights off).
Rev 0.0
pr. 4
pr. 5
Fig. 2-03
EN
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents