Testing - Smeg STO905U Instruction Manual

INSTALLATION INSTRUCTIONS
ATTENTION: THE SPRINGS OF THE DISHWASHER MUST NEI-
THER BE TOO TIGHT NOR TO LOW OTHERWISE THE DOOR WILL
BE UNBALANCED WHEN OPENING AND BE UNABLE TO REMAIN
FULLY OPEN (IF THE SPRING IS TOO TIGHT) OR THE ASSIST-
ED CLOSING SYSTEM WILL NOT OPERATE CORRECTLY (IF THE
SPRING IS TOO LOOSE): PERFORM TESTS TO FIND THE RIGHT
COMPROMISE.
5.4

Testing

After installation, test the dishwasher by starting a work cycle. Check for leaks
and make sure the appliance does not malfunction.
Rev 0.0
EN
35