Parkside 339157 1910 Instructions Manual page 49

■ Sufficient and continuously intact oil lubrication is highly impor-
tant for optimum functioning .
■ The appliance should be serviced regularly (approximately after
1–2 operations) .
■ Always wear suitable work gloves .
■ Maintenance may only be carried out by instructed persons .
A long service life and trouble-free operation of this quality
product are guaranteed by compliance with the maintenance
instructions given .
■ Check the condition of your consumables and accessories every
time you service them .
■ Regularly check the tightness of all screws, the stop bracket and
the saw blade . Also check the speed and vibration level of the
appliance regularly .
Disconnect the appliance from the compressor if it runs irregularly .
■ Check the condition of the saw blade regularly . The saw blade
must not be defective or deformed .
■ Clean your tool with a dry soft cloth or blow it out lightly with
compressed air .
Never use caustic cleaning agents .
■ Make sure that no liquids get into the saw .
■ Store the appliance protected from the weather in dry rooms that
are inaccessible to children .
■ 46 │ GB │ IE
PDKS 6.3 B3