Yamaha XMAX BUSINESS Edition 2010 Owner's Manual page 59

3. Remove the engine oil filler cap
and the engine oil drain bolt to
drain the oil from the crankcase.
1
ZAUM0702
1. Engine oil drain bolt
4. Check the drain bolt washer for
damage and replace it if neces-
sary.
1. Engine oil drain bolt
2. Washer
PERIODIC MAINTENANCE AND ADJUSTMENT
TIP
Skip steps 5–9 if the oil filter element
is not being replaced.
5. Remove the oil filter element
cover by removing the bolts.
ZAUM0711
1. Oil filter element cover
6. Remove the oil filter element and
O-ring.
6-11
1
2
ZAUM0712
1. Oil filter element
2. O-ring
3. Oil filter element cover
7. Check the O-ring for damage and
1
replace it if necessary.
8. Install the new oil filter element
and an O-ring.
9. Install the oil filter element cover
by installing the bolts, then tigh-
tening them to the specified tor-
que.
Tightening torque:
Oil filter cover bolt:
10 Nm (1.0 m•kgf, 7.2 ft•lbf)
3
6