Beko WMB 91242LC User Manual page 18

Changing the delayed start period
If you want to change the time during countdown:
Press Start / Pause / Cancel button. ":" sign in the
middle of the delayed start time on the display stops
flashing. Pause symbol appears. Delayed Start symbol
flashes. Start symbol disappears. Set the desired
delayed start time by pressing the Delayed Start + or
- buttons. Press Start / Pause / Cancel button. Delayed
Start symbol illuminates steadily. Pause symbol
disappears. Start symbol appears. ":" sign in the middle
of the delayed start time on the display starts flashing.
Cancelling the Delayed Start function
If you want to cancel the delayed start countdown and
start the programme immediately:
Press Start / Pause / Cancel button. ":" sign in the
middle of the delayed start time on the display stops
flashing. Start symbol disappears. Pause symbol and
Delayed Start symbol flashes. Decrease the delayed
start time by pressing the Delayed Start - button.
Programme duration appears after 30 minutes. Press
Start / Pause / Cancel button to start the programme.
4.13 Starting the programme
Press Start / Pause / Cancel button to start the
programme. Start symbol showing the startup of
the programme will turn on. Loading door is locked
and Door Locked symbol appears on the display. The
symbol of the step from which the programme has
started appears on the display (Prewash, Main Wash,
Rinse, Softener and Spin).
4.14 Progress of programme
Progress of a running programme is indicated on the
display with a set of symbols.
Relevant symbol appears on the display at the
beginning of each programme step and all symbols
remain lit at the end of the programme. The
farthermost right symbol indicates the current
programme step.
Prewash
If the Prewash auxiliary function is selected, Prewash
symbol appears on the display indicating that the
prewash step has started.
Main Wash
Main Wash symbol indicating that the main wash step
has started appears on the display.
Rinse
Rinse symbol indicating that the rinsing step has
started appears on the display.
Softener
Softener symbol indicating that the softener step has
started appears on the display.
Spin
Appears at the beginning of the final spin step and
remains lit during Spin and Pump special programmes.
C
If the machine does not pass to the spinning
step, Rinse Hold function might be active or the
automatic unbalanced load detection system
might be activated due to the unbalanced
distribution of the laundry in the machine.
18 / EN
4.15 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases
when the water level is unsuitable.
Door Locked symbol appears when the loading door
is locked. This symbol will flash until the loading door
becomes ready to open when programme completes
or the machine is paused. Do not force to open the
loading door in this step. Symbol disappears when the
door is ready to open. You can open the door when the
symbol disappears.
4.16 Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause / Cancel button to switch the
machine to pause mode. Pause symbol appears on the
display indicating that the machine is paused. Start
symbol disappears.
Changing the speed and temperature settings for
auxiliary functions
Depending on the step the programme has reached,
you may cancel or activate the auxiliary functions; see,
"Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and "Temperature
selection".
adding or taking out laundry
Press the Start / Pause / Cancel button to switch the
machine to pause mode. The programme follow-up
light of the relevant step during which the machine
was switched into the pause mode will flash. Wait
until the Loading Door can be opened. Open the
Loading Door and add or take out the laundry. Close
the Loading Door. Make changes in auxiliary functions,
temperature and speed settings if necessary. Press
Start / Pause / Cancel button to start the machine.
C
The loading door will not open if the water
temperature in the machine is high or the water
level is above the door opening.
4.17 Child Lock
Use Child Lock function to prevent children from
tampering with the machine. Thus you can avoid any
changes in a running programme.
C
You can switch on and off the machine with On
/ Off button when the Child Lock is active. When
you switch on the machine again, programme will
resume from where it has stopped.
To activate the Child Lock:
Press and hold 2 and 4
nd th
for 3 seconds. "Con" appears on the display.
C
Same phrase will appear on the display if you press
any button when Child Lock is enabled.
Washing Machine / User's Manual
Auxiliary Function buttons