How To Use Basic Functions - Qlima S 7035 Operating Manual

Vertical louver auto swing display
TURBO mode display
Not applicable for this unit
6. MODE display - Displays the current mode including: AUTO > COOL > DRY > HEAT > FAN.
7. ECO display - Displays when ECO feature is activated.
8. GEAR display - Displays when GEAR feature is activated.
9. LOCK display - Displays when LOCK feature is activated.
10. Temperature/Timer/Fan speed display - Displays the set temperature by default, or fan speed or timer
setting when using TIMER ON/OFF functions.
• Temperature range: 16-30°C/60-86°F
• Timer setting range: 0-24 hours
• Fan speed setting range: AU -100%
• Humidity setting range: 35% -85%
This display is blank when operating in FAN mode.
G
NOTE
All indicators shown in the figure are for the purpose of clear presentation. But during the actual
operation, only the relative function signs are shown on the display window.
H

HOW TO USE BASIC FUNCTIONS

BASIC OPERATION
ATTENTION! Before operation, please ensure the unit is plugged in and power is available.
SETTING TEMPERATURE
The operating temperature range for units is 16-30°C (60-86°F). You can increase or decrease the set
temperature in 0.5°C (1°F) increments.
AUTO mode
In AUTO mode, the unit will automatically select
the COOL, FAN, or HEAT operation based on
the set temperature.
1. Press the MODE button to select AUTO.
Set your desired temperature using the TEMP ▲ or ▼ TEMP button.
2.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED can't be set in AUTO mode.
COOL mode
1. Press the MODE button to select COOL mode.
Set your desired temperature using the TEMP ▲ or ▼ TEMP button.
2.
3. Press FAN button to select the fan speed in range of AU - 100%
4. Press the ON/OFF button to start the unit.
man_S70xx ('21) V1.indd 49 man_S70xx ('21) V1.indd 49
4
49
08-11-2021 18:08 08-11-2021 18:08