Canon imageCLASS LBP6780dn Service Manual page 95

2
Technology > MEAP > Enhanced System Application Management > SSO-H (Single Sign-On-H) overview
● Setting the Authentication Method
In the case of SSO-H, it is possible to use a combination of multiple authentication methods.
The combination can be changed from the SSO-H setting screen. (For details, refer to
e-Manual > MEAP > Menu for Administrators > Setting the SSO-H > "Setting the User
Authentication System".)
Note:
The default settings are shown below.
• User authentication method : "Server Authentication + Local Device Authentication"
• Type of authentication : "Active Directory"
CAUTION:
To ensure the security, it is recommended to change the password and the user name
of the Local Device Authentication administrator from those at the time of shipment
immediately after you have started using SSO-H.
● Using an Accounting Product When SSO-H Is Used
SSO-H has collaborative linkage with NetSpot Accountant, imageWARE / iW Accounting
Manager, imageWARE Enterprise Management Console / iW Management Console Access
Management Plug-in, imageWARE Enterprise Management Console / iW Management
Console Accounting Management Plug-in.
For details on the combination, refer to the User's Manual or Service Manual of the product.
2 Technology > MEAP > Enhanced System Application Management > SSO-H (Single Sign-On-H) overview
● Conducting Department ID Management When SSO-H Is Used
Department ID Management can be conducted also when SSO-H is used for login service.
Usage Conditions
In order to allow coexistence of SSO-H and Department ID management, the following
conditions need to be satisfied.
• Only "Local Device Authentication" can be used as the user authentication method.
• The department ID and password have been already set for the SSO-H login user before
enabling department ID management.
• The information (the department ID and password) set for the login user coincides with the
information registered in Department ID Management.
Setting Procedure
In order to allow coexistence of SSO-H and Department ID management, the following
F-2-118
procedure needs to be performed to enable the setting.
1) Change the authentication method to DA (Default Authentication).
Access SMS, and select [Default Authentication] in [Enhanced System Application
Management] > [Login Service]. (How to log in to SMS can be found in "Login to SMS".)
13) Restart the device.
Restart the device in order to reflect the changes in login service.
2-59
F-2-119
2-59