Quick Setup Guide
Read the "Important Safety Instructions" section on the back side of this Setup Guide carefully to install the
printer safely.
1
Confirm the supplied accessories.
A
B
2
Remove the packing materials.
Remove all the tape.
Remove all the orange tape attached to the printer when performing the following procedure.
The packing materials may be changed in form or placement, or may be added or removed without notice.
A
FT6-0163 (010)
XXXXXXXXXX
Read this guide first.
Please read this guide before operating this
product. After you finish reading this guide,
store it in a safe place for future reference.
Check!
Did you remove all the packing materials?
C
User Manual CD-ROM
D
User Software CD-ROM
3
Move the printer.
4
Load paper.
Up to here
F T 6 - 0 1 6 3 - 0 1 0
© CANON INC. 2013
PRINTED IN VIETNAM
Make sure that all the orange tape is completely removed.
Close the covers after you finish checking.
Hook
Hook
5
Connect the power cord.
6
Connect the printer and computer.
USB
OFF
A message prompts you to turn on the printer during the printer driver installation.
LAN
Configure the network settings, if necessary.
See the e-Manual.
C
1
2
B
ON
7