Download Print this page
Cornelius 8027 Installation Instructions
Cornelius 8027 Installation Instructions

Cornelius 8027 Installation Instructions

Ed300 dispenser kit

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS

For Model ED300 Dispenser and the Following 30" Wide Ice Maker Model Series:
Manitowoc QQ1400C, Q-Dual
Scotsman CME 806/865/1002/1056
Item No.
Part No.
1
29505
2
22127
3
50904
4
52946
52964
5
91957
6
620042919
7
620701601
8
620701902
9
620701901
10
620701903
11
92254
!
WARNING:
Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the
user. Verify that all the power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or
the equipment manufacturer's instructions.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All of the attachment screws and plates must be installed as directed in this manual.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
The dispenser must be secured with 3/8 X 16 bolts (6) to the counter before installing this ice maker adapter kit. Refer
to the installation manual or Figure 3 for the counter mounting template.
NOTE: Adjust the automatic agitation timer located in the dispenser's electrical control box to 5 sec-
onds on, 20 minutes off. Access to the timer is provided by removing the merchandiser/upper
front panel.
1. Remove the top plastic bin covers (2) from the dispenser.
2. Place the ice maker adapter lid assembly (item 1) on top of the dispenser and position it flush with the rear and
sides of the dispenser as shown in Figure 1.
3. Install the ice baffle on the lid assembly as shown in Figure 2.
Release Date: November 10, 2010
© 1998-2010, IMI Cornelius Inc.
K
P
N
IT
ART
UMBERS
Table 1: Loose Shipped Parts
Lid Assembly
Ice Maker Mounting Bracket
RTV. 3Oz Tube
Manual Ice Fill Cover - Black (08027)
Manual Ice Fill Cover - Gray (08030)
Label, "Disconnect Power Before Cleaning"
ED300 Ice Baffle
#10 x 1/2" LG. Sheet metal Screw
#8-32 Nylon Acorn Nut
Sealing Washer
#8 Nylon Washer
Installation Instructions
www.cornelius.com
ED300 Dispenser Kit Installation Instructions
FOR
08027
08030
AND
Name
- 1 -
Qty.
1
2
1
1
1
1
12
4
4
4
1
Revision: F
Publication Number: 92254

Advertisement

loading

Summary of Contents for Cornelius 8027

  • Page 1: Installation Instructions

    1. Remove the top plastic bin covers (2) from the dispenser. 2. Place the ice maker adapter lid assembly (item 1) on top of the dispenser and position it flush with the rear and sides of the dispenser as shown in Figure 1.
  • Page 2 5. Seal the ice maker to the dispenser lid as follows (see Figure 1). A. Run beads of RTV around the opening in the lid and inside of the perimeter of the ice maker outline so that the ice maker will set on the RTV.
  • Page 3 4 PLC. 4 PLC. 1 13/16 1 5/16 18 5/8 6 11/16 3 1/2 © 1998-2010, IMI Cornelius Inc. ED300 Dispenser Kit Installation Instructions ICEMAKER SHOWN FOR REFERENCE BAFFLE (ITEM 6) SHOWN IN PLACE 4 PLC. Figure 2. ED300 Baffle Kit ø...

This manual is also suitable for:

295058030