Volvo XC40 TWIN ENGINE 2019 Owner's Manual page 629

3. Press the new wiper blade into place. You
should hear a click. Check that it is firmly
installed.
4. Lower the wiper arm.
IMPORTANT
Check the blades regularly. Neglected
maintenance shortens the service life of
the wiper blades.
Related information
Using the rain sensor (p. 166)
•
Using windscreen and headlamp washers
•
(p. 167)
Using automatic rear windscreen wiping
•
when reversing (p. 169)
Using the rain sensor's memory function
•
(p. 167)
Using the rear window wiper and washer
•
(p. 168)
Filling washer fluid (p. 629)
•
Set the wiper blades in service position
•
(p. 628)
Replacing windscreen wiper blades
•
(p. 627)
Using windscreen wipers (p. 165)
•
Wiper blades and washer fluid (p. 164)
•
Replacing windscreen wiper
blades
The wiper blades sweep water away from the
windscreen and rear window. Together with
washer fluid, they aim to clean the windows
and ensure visibility while driving. Wind-
screen and rear window wiper blades can be
replaced.
MAINTENANCE AND SERVICE
Fold up the wiper arm when it is in service
position. Service position is activated/
deactivated via the function view in the
centre display when the car is stationary
and the windscreen wipers are not on.
Press the button located on the wiper
blade mounting and pull straight out paral-
lel with the wiper arm.
Slide in the new wiper blade until a "click"
is heard.
3. Check that the blade is firmly installed.
4. Fold the wiper arm back towards the
windscreen.
The wiper blades are different lengths
}}
627