Level
Functions
II
The headlamps come on.
•
Warning/indicator lamps illumi-
•
nate for 5 seconds.
Several other systems are acti-
•
vated. However, heating in seat
cushions and the rear window
can only be activated after the
car has been started.
This ignition position consumes a
lot of current from the battery
and should therefore be avoided!
A
Also activated when the door is opened.
Related information
Starting the car (p. 420)
•
Adjusting the steering wheel (p. 180)
•
Using jump starting with another battery
•
(p. 458)
Selecting ignition mode (p. 423)
•
Selecting ignition mode
The car's electrical system can be set in dif-
ferent levels/positions and in this way make
the different functions available.
Selecting ignition position
Start button location.
Ignition position 0 – Unlock the car and
•
store the remote control key inside the
car.
NOTE
To reach level I or II without starting the
engine - do not depress the brake pedal, or
the clutch pedal for cars with manual gear
changing, when these ignition positions
are to be selected.
STARTING AND DRIVING
Ignition position I – Depress the start
•
button and release.
Ignition position II – Press and hold the
•
button depressed for approx. 5 seconds.
Then release the button.
Back to ignition position0 – To return to
•
ignition position 0 from position I and II –
press the start button.
Related information
Starting the car (p. 420)
•
Switching off the car (p. 421)
•
Ignition positions (p. 422)
•
Adjusting the steering wheel (p. 180)
•
Using jump starting with another battery
•
(p. 458)
423